High-pressure hoses: selection, production, repair

SELECTION OF HIGH-PRESSURE HOSES FOR YOUR TASKS

We select high-pressure hoses (HPH) taking into account operating conditions in different industries: agricultural machinery, construction, industrial equipment, road and special-purpose machines.

Each sector places its own demands on hydraulic systems, especially on their flexible elements. So when selecting a hose it is important to consider not only the working pressure but also a number of other parameters:

  • temperature of the working medium (from −40°C to +120°C, up to +260°C for PTFE),
  • type of medium (hydraulic oil, water, emulsions, fuel, chemicals),
  • frequency of hydraulic impulses (pressure pulsation),
  • minimum bend radius,
  • mechanical loads and vibration,
  • environmental conditions (humidity, dust, ultraviolet).

For agricultural machinery, universal 1SN and 2SN hoses with one or two steel braids are normally used.
For construction and heavy machinery, and for mining equipment, stronger hoses are used: 4SP, 4SH, R13 and R15 with 4–6 layers of spiral reinforcement.

HPH photo 1 HPH photo 2

Selection of fittings, threaded connections and adapters is the key to a leak-tight system

Fittings are not just connecting elements. They ensure the stability, leak-tightness and reliability of the entire hydraulic system. We select fittings strictly according to the parameters of the hose and the equipment.

  • Sealing options and manufacturing standards: DK, DKOL, DKOS, ORFS, DKR, DKJ, AGN, SAE 3000 PSI / 6000 PSI flange connections.
  • Thread types: metric, BSP pipe, UNF inch, NPTF tapered.
  • For severe operating conditions (high pressure, vibration, pulsating loads) Interlock fittings (double crimping for 4SP/4SH/R13 hoses) are used.
  • For protection against mechanical damage, an additional plastic or metal sleeve can be fitted.

IN-HOUSE MADE-TO-ORDER HPH PRODUCTION

Modern equipment and quality control

We make high-pressure hoses using modern technologies on quality Uniflex equipment (Germany) in accordance with international standards. Our capacity allows us to assemble HPH of any complexity:
Photo from the warehouse

  • hoses of the 1SN, 2SN, 2SC, 4SP, 4SH, R13, R15 standards;
  • PTFE (Teflon) hoses for aggressive media;
  • thermoplastic hoses R7, R8;
  • crimping of all types of fittings (DK, ORFS, BSP, NPT, etc.);
  • testing on a test bench at pressures up to 1500 bar.

Every assembled HPH undergoes strict quality control, which is especially important for systems where the reliability of components is critical for uninterrupted operation.

HPH production times and warranties

Production time depends on the complexity and volume of the order. We give precise lead times and guarantee the high quality of every product. Ready-made HPH of popular sizes are also in stock.
All connections and components carry a warranty, which confirms our responsibility to the client.

HPH photo from the warehouse 2HPH photo from the warehouse

REPAIR OF HIGH-PRESSURE HOSES

Diagnostics, replacement of fittings

One of our services is HPH repair. When a hose is damaged, it is not always necessary to buy a new one: we offer quick and economical repair. We carry out diagnostics (cracks, wear, leaks) and, if needed, replace the fittings while keeping the hose itself.
After repair we guarantee reliable and leak-tight operation of the system, which lets the client save money.

Cost and repair times

The price depends on the complexity of the work, and the time on the nature of the damage and the number of hoses. We keep to deadlines and strive to minimize downtime of your equipment.

Selection of components for hydraulic systems

In stock: hoses in coils, fittings, connectors, adapters

We offer a wide choice of components: crimp couplings, fittings, adapters, repair inserts, quick-release couplings.
All components are of high quality and match the stated specifications. Selection is made according to the parameters of your system.

CONSULTATIONS AND TECHNICAL SUPPORT

Our specialists will select components according to the specifications and requirements of your hydraulic system. We will provide detailed consultations and help you choose the best solution for your tasks.

Benefits of working with us

  • In-house production and quality control;
  • Warranties and keeping to deadlines;
  • Fast service for businesses and private customers.

Leave a request for HPH selection or repair

Contact us through the form, by phone or in messengers, and we will quickly help you with the selection or repair of high-pressure hoses.

Frequently asked questions (FAQ)

1. Can I order only a repair, without buying a new HPH?

Yes, we repair all types of HPH, regardless of the manufacturer.

2. What is the production time?

In most cases HPH are made within a day or the next day, depending on the order volume. In urgent cases, within a few hours.

3. Do you give a warranty on your work?

Yes, we guarantee the quality of manufacture and repair, as well as compliance with technical requirements.

4. What should I do if I don't know the exact parameters of the HPH?

Take a photo of the hose and the fittings (especially the end face) and give a few technical parameters: the inner or outer thread diameter and the length of the HPH. Or simply bring a sample, and our engineers will determine all the characteristics themselves.

5. Which hoses are used?

We work with proven brands that have certificates of conformity (ISO, DSTU): Gates, SEL Turkey, CT Hose China.

6. Can I buy fittings or quick-release couplings separately?

Yes, we sell all components separately, for professional or do-it-yourself crimping of HPH.